Seko EM99107133 - Multifunctional valve PVDF/PTFE O 8x12 - FPM - MS1 O 64-94

Seko EM99107133 - Multifunctional valve PVDF/PTFE O 8x12 - FPM - MS1 O 64-94
158,8 EUR 192,2 EUR incl. VAT158,8 EUR / pcs
In stock ext.
Personally in shop:Tuesday 27.10With a delivery company:Thursday 29.10
CodeEM99107133ProducerSEKO S.p.A.
SEKO • MOTOR-DRIVEN PUMPS • SPARE PART / ACCESSORY

EM99107133

Multifunction valve • MS1 • Ø64–94 mm / Ø64–94 mm

SEKO EM99107133 is an original multifunction valve for MS1 motor-driven dosing pumps. The functional size and exact part version must match the ordering code of your pump.

Manufacturer designation: Multifunction Valve (PVDF/FPM) - PVDF/PTFE conn. O 8x12 - FPM - MS1 O 64-94

MS1
Compatible series
Ø64–94 mm / Ø64–94 mm
Functional size
PVDF / PTFE / FPM
Materials
—
Stroke rate
MOST IMPORTANT INFORMATION BEFORE ORDERING

Which motor-driven pumps is this part suitable for?

For motor-driven pumps, checking the series alone is not enough. Functional hydraulic size, diaphragm or piston diameter, material configuration and, for mechanical parts, often the stroke version must also match.

How to verify compatibility: MS1 · Ø64–94 mm / Ø64–94 mm · PVDF / PTFE / FPM. Compare the complete pump ordering code or nameplate. If uncertain, send us the code and we will verify compatibility.
Specific compatible pumps from the e-shop

★ Part function

✓Restores or completes the wetted section of the motor-driven dosing pump.
✓Compatibility is governed by exact diaphragm / piston size and material configuration.
✓For valves and heads, connection geometry and operating version must also match.
✓After installation, check leak tightness, priming and stable dosing.

🔧 When to inspect or replace the part

•Reduced flow or unstable dosing.
•Leakage, backflow or suction problems.
•Visible mechanical or chemical damage.
•Preventive maintenance according to duty and chemical.

Where the part works in a motor-driven dosing pump

1 · SUCTION
Foot filter / suction line
→
2 · HYDRAULICS
Head + valve
→
3 · DISCHARGE
Valve / piping
→
4 · PROCESS
Injection point

Technical parameters

Design and compatibility

Part typeMultifunction valve
Compatible seriesMS1
Functional sizeØ64–94 mm / Ø64–94 mm
MaterialsPVDF / PTFE / FPM
Stroke ratenot separately specified by the manufacturer in the available sources
Stroke lengthnot separately specified by the manufacturer in the available sources
Connection8 × 12 mm

Dimensions and identification

ManufacturerSEKO
Product codeEM99107133
Overall part dimensionsnot separately specified by the manufacturer in the available sources
Part weightnot separately specified by the manufacturer in the available sources
HS / CN codeverify by customs classification of the spare part

4 checks before ordering

1 · SERIES
MS1
Must match the actual pump family.
2 · SIZE
Ø64–94 mm / Ø64–94 mm
Compare diaphragm / piston diameter or mechanism size.
3 · MATERIALS
PVDF / PTFE / FPM
Material code must match the pump and chemical.
4 · STROKE
not separately specified by the manufacturer in the available sources
For mechanical parts also verify stroke rate and length.

Chemical compatibility

For wetted parts, verify resistance of all materials to the actual chemical, concentration and temperature.

Check chemical resistance

Installation and service

• Stop, depressurise and safely drain the wetted section before disassembly.
• Clean sealing faces and do not reuse damaged seals.
• Observe correct suction / delivery valve orientation.
• After assembly, bleed the pump and perform a leak check.
Want to confirm that the part fits your motor-driven pump?
Send the complete SEKO ordering code or a photo of the nameplate. We will verify series, hydraulic size, stroke version, materials and the correct spare part.
VýrobceSEKO S.p.A.
Technical parametersParameters

This online store stores cookies that help it function properly. By using our services, you agree to their use.

Detailed settingsAllow everything