Seko 9900107165a - Injection valve PVDF/EPDM for SEKO 603/800 metering pumps

Seko 9900107165a - Injection valve PVDF/EPDM for SEKO 603/800 metering pumps
69,29 EUR 83,84 EUR incl. VAT69,29 EUR / pcs
In stock > 3 pcs
Personally in shop:tomorrowWith a delivery company:day after tomorrow
Code9900107165aProducerSEKO S.p.A.
SEKO • SPARE PART / ACCESSORY

9900107165a

Injection valve • Tekba / Tekba-R • 603 / 800 • PVDF / EPDM

SEKO 9900107165a is an original injection valve for Tekba / Tekba-R dosing pumps. Exact matching to the specific pump is essential, especially series, hydraulic/model size and technical version.

Manufacturer designation: Injection Valve KIT - PVDF/EPDM Tekba pump 603/800

Tekba / Tekba-R
Compatible series
603 / 800
Hydraulic / model
PVDF / EPDM
Materials
—
Tube / connection
QUICK COMPATIBILITY CHECK

Which pumps is this part suitable for?

Exact pump compatibility is the most important selection criterion for a spare part. Check the pump series, hydraulic/model size, material configuration and connection.

How to verify compatibility: Tekba / Tekba-R · 603 / 800 · PVDF / EPDM. Compare the complete pump ordering code. If uncertain, send us the code or a photo of the nameplate.
Examples of compatible pumps

★ Part function

✓Restores correct operation of the wetted dosing section.
✓Designed as an original SEKO component for the stated series and hydraulic size.
✓Keep the same wetted-material configuration unless a material change has been technically verified.
✓After installation, check leak tightness and stable dosing performance.

🔧 When to inspect or replace the part

•Reduced or unstable dosing performance.
•Leakage, backflow, air ingress or poor priming.
•Visible chemical, mechanical or fatigue damage.
•Preventive maintenance according to duty and dosed medium.

Where the part works in the dosing system

1 · TANK
Foot valve / suction line
→
2 · PUMP
Wetted hydraulic section
→
3 · DISCHARGE
Tube / valve
→
4 · PROCESS
Injection point

Technical parameters

Design and compatibility

Part typeInjection valve
Compatible seriesTekba / Tekba-R
Hydraulic / model603 / 800
MaterialsPVDF / EPDM
Tube / connectionnot separately specified by the manufacturer in the available sources
Power supplynot separately specified by the manufacturer in the available sources
Pack / lengthnot separately specified by the manufacturer in the available sources

Dimensions and identification

ManufacturerSEKO
Product code9900107165a
Dimensionsnot separately specified by the manufacturer in the available sources
Weightnot separately specified by the manufacturer in the available sources
HS / CN codeverify by customs classification of the part

Checks before ordering

1 · PUMP SERIES
Tekba / Tekba-R
Must match the actual pump family.
2 · HYDRAULIC / MODEL
603 / 800
Check the hydraulic number in the code or on the nameplate.
3 · MATERIALS
PVDF / EPDM
Seals and wetted materials must match the application.
4 · CONNECTION
not separately specified by the manufacturer in the available sources
Check tube, thread or electrical-variant size.

Chemical compatibility

For every wetted component, verify material resistance for the actual chemical, concentration and temperature.

Check chemical resistance

Installation and service

• Depressurise and safely drain the chemical before disassembly.
• Clean sealing faces and do not reuse damaged O-rings.
• Prime / bleed the pump after installation and inspect all joints.
• If the medium changes, recheck all wetted materials.
Not sure which spare part is correct?
Send the complete SEKO dosing-pump code or a photo of the nameplate. We will verify the correct part, hydraulic size, materials and connection.
VýrobceSEKO S.p.A.
Technical parametersParameters

This online store stores cookies that help it function properly. By using our services, you agree to their use.

Detailed settingsAllow everything