CD/I 200/12 Q1AEGG IE3
EBARA CD/I 200/12 Q1AEGG IE3 is a single-stage stainless steel centrifugal pump for transferring clean water, water supply and pressure boosting. It is suitable for small irrigation systems, washing applications, cooling circuits and industrial water distribution. The compact close-coupled design makes it easier to integrate into installations with limited space.
The casing and closed impeller are made of AISI 304. The silicon carbide / metallised carbon / EPDM mechanical seal configuration matters when selecting the pump for the liquid and operating temperature. The three-phase motor has a catalogue output of 0.9 kW and a 3~230/400 V supply at 50 Hz. The G 1½ suction and G 1 discharge ports provide threaded pipe connections. The AISI 304 stainless steel motor casing and motor bracket complement the stainless steel hydraulics and make external surfaces easier to clean.
For hydraulic size 200/12, the selected catalogue specifies 18.5 m head at 9.6 m³/h and 14 m at 15 m³/h. These points and the curve below apply at 50 Hz. Account for pipe losses, suction conditions and the liquid properties when selecting the operating point. The dimensional drawing and component overview support installation and servicing.
Order code: 1990100304IKey benefits
- AISI 304 stainless steel casing and impeller.
- AISI 304 stainless steel hydraulics and motor casing.
- Three-phase motor, IP55 protection and insulation class F.
- Threaded G 1½ suction and G 1 discharge connections.
Applications
- Clean water supply and pressure boosting.
- Small irrigation systems and garden watering.
- Washing and industrial clean water distribution.
- Cooling circuits within the pump temperature limits.
Technical specifications
- Motor output P2
- 0.9 kW
- Motor
- 3~230/400 V · 50 Hz · IE3
- Speed / protection / insulation
- ≈ 2800 min⁻¹ · IP55 · F
- Flow rate Q / head H
- 4.8–15 m³/h / 21.3–14 m
- H at Q = 0
- 22.8 m
- Casing working pressure
- max. 8 bar
- Clean water temperature
- −5 … +120 °C
- Hydraulics / mechanical seal
- AISI 304 / silicon carbide / metallised carbon / EPDM
- Suction / discharge
- G 1½ / G 1
- Reference dimensions A × B × H
- 208 × 338 × 229.5 mm
- Version
- Q1AEGG
- HS code
- 841370
Performance curve
Original EBARA diagram, 50 Hz. Follow the curve marked 200/12. Flow rate and head define a single operating point.Dimensions and installation

Reference dimensions of the standard series (CD 50 Hz Rev. X): A = 208, B = 338, H = 229.5, H1 = 106, H2 = 123.5 mm. Check the dimensions of the specific manufacturing version before installation. Fill the pump and suction line before starting. The three-phase version requires external motor overload protection.
Pump construction and sectional view
Construction overview of the CD / CDM pump range. Position numbers identify components in the drawing.


Accessories
The pressure tank, pressure switch and controls are selected to suit the required flow rate, pressure and operating mode.
Pump, accessories and service
Send the required flow rate, head and water temperature. For service, include a photograph of the nameplate.
